Compatible with Löwen Royal Dart 86 and 88.Piezo Sensor Kit, this sensor is required when missed throws are no longer displayed or detected. The most common cause of this is a broken ribbon cable on the sensors. Replacing the sensors is very easy and takes just 3 minutes. Simply position them next to the old sensors using the self-adhesive backing and stick them in place. The sensors’ special cable is highly flexible and therefore extremely durable.Important! The connectors are the 3-pin type, which are installed in the 86 and 88 series models. This set includes both sensors with the appropriate cable lengths (dartboard: 1x top, 1x bottom).Please make sure before purchasing that these are the exact sensors installed in your system. If you need the version with RCA plugs, please let us know after your purchase.Installation instructions are included in the package.The sensors have been tested and work flawlessly, there are no issues with loud ambient noise or similar conditions.

Original Löwen Dart Replacement Part.

Original Löwen Dart Replacement Part.

This set includes an adjustable foot compatible with the dart machines listed above and others; it is often used as a replacement for broken adjustable feet or torn-out drive nuts.Replacing defective feet is very easy. The necessary screws are included in the package. Fits older-generation dart machines with screw-on flange nuts (see photos); for newer models with drive-in nuts, you may need to pre-drill the holes.Contents: 1x M10 adjustable foot, 1x M10 flange nut, mounting screws.

Compatible with the dart machines listed above and others, often used as a replacement for broken adjustable feet or torn-out drive nuts.Replacing defective feet is very easy. The required screws are included.Fits perfectly for older-generation dart machines with threaded flange nuts (see photos); for newer models with drive-in nuts, pre-drilling may be necessary.Contents: 1x M10 adjustable foot, 1x M10 flange nut, mounting screws.

Original Löwen Dart Replacement Part.This is an original Löwen Dart replacement part of excellent quality.For an optimal playing experience, we recommend replacing all four catch segments.

Compatible with Löwen Dart SM92, SM94.- Length: approx. 80 cm

Compatible with Löwen Dart HB8, HB9, and many others.- Length: approx. 80–100 cm

Compatible with Löwen Dart IR sensors SM92, SM94, and HB8.- Length: approx. 185 cm

Mainboard CPU for Löwen Tournament Darts SM92 SM94.The board has been tested and is 100% functional.A new backup battery and a LEO EPROM (for playing against the computer) have been installed.

This EPROM is compatible with models manufactured through 2012 (large CPU! See Figure 2).This is the standard HB8 EPROM in the latest known version, v15.Removed from a used device, tested, and in perfect condition.

This EPROM is compatible with models manufactured through 2012 (large CPU! See Figure 2).Includes the games “Rapid Fire,” “Splitscore,” and “LEO” (play against the computer). All existing games are retained. Removed from a used unit, tested, and in perfect condition.

This EPROM is compatible with models featuring a Quadro Matrix up to and including those manufactured in 2012 (large CPU! See Figure 2). Includes the games “Rapid Fire,” “Splitscore,” and “LEO” (play against the computer). All existing games are retained. Removed from a used unit, tested, and in perfect condition.

EPROM including the bonus games “301 Eliminate,” “Mark 21,” and “LEO” (play against the computer).All existing games are retained, for 8 players. Also compatible with 4-player units, please specify when ordering.Ideal replacement for the standard EPROM, latest software version.Removed from a used device, tested, and in perfect condition.

The infrared (proximity sensor) sensor is used to recognise the player after throwing the third dart when he is at the dartboard or away from it again.This is an original Löwen Dart spare part in perfect quality. This is a completely overhauled sensor. Fits Löwen Dart machines HB8 as well as SM92, SM94 dart machines.

The infrared sensor (proximity sensor) is used to detect the player after the third dart is thrown, when the player is standing at the dartboard or moving away from it.Includes installation instructions.This is an original Löwen Dart replacement part of excellent quality.Original Löwen part: E40450810 -1.

Replacement for defective target lighting, lamp holder compatible with Löwen Dart SM92 and SM94 models.Includes the original Löwen Dart target lighting and a compatible adapter (screws included) for installation in Löwen Dart SM92 and SM94 dart machines.Comes fully assembled with installation instructions for easy replacement of the defective unit.

LP Dart Controller for Löwen Tournament Dart HB8 models manufactured in 2012 or later.This is the small circuit board, see photos.

Compatible with Löwen Tournament Darts FM 90, SM 92, SM 94, SM 96, HB 8, HB 9, and others with an RCA plug. Piezo Sensor Kit, this sensor is required when missed shots are no longer displayed or detected. The most common cause of this is a broken ribbon cable on the sensors. Replacing the sensor is very easy and takes just 3 minutes. Simply position it next to the old sensor using the self-adhesive backing and stick it in place. Unplug the RCA connector of the defective sensor from the main circuit board, plug in the new one, and you’re done. The sensor’s special cable is highly flexible and therefore extremely durable.Please note that some machines (e.g., FM90) have two of these sensors—one upper and one lower. If you need two, please purchase this item twice. Installation instructions are included in the package.The sensor has been tested and works flawlessly; there are no issues with loud ambient noise or similar conditions.

Compatible with Löwen Tournament Dart SM 92, SM 94, SM 96, HB 8, Vision Dart 2000, and HB 9.Piezo Sensor Kit, this sensor is compatible with the dart machines listed above. This sensor is required when missed shots are no longer displayed or detected. The most common cause of this is a broken ribbon cable.Replacing the sensor is incredibly easy and takes just 3 minutes. Simply position it next to the old sensor using the self-adhesive backing, stick it in place, unplug the defective sensor, plug in the new one, and you’re done. There’s no need to thread the cable through the housing or anything like that. The sensor’s special cable is highly flexible and therefore extremely durable.However, installation instructions are included in the package despite the simple replacement process. The sensor has been tested and works flawlessly; there are no issues with loud ambient noise or similar conditions.Please make sure before purchasing that this circuit board (bottom image) is installed in your machine. If this is not the case, please let me know, and I will ship the sensor with the appropriate connector for the main circuit board.

Compatible with Merit Merkur darts with a 2-pin connector.This sensor is required when missed throws are no longer displayed or detected. The most common cause of this is a broken ribbon cable. Replacing the sensor is very easy and takes just 3 minutes. Simply place it next to the old sensor using the self-adhesive backing, stick it in place, unplug the defective sensor, plug in the new one, and you’re done. The sensor’s special cable is highly flexible and therefore extremely durable.Installation instructions are included.The sensor has been tested and works flawlessly, it has no issues with loud ambient noise or similar conditions.

Compatible with Merit Merkur darts with a 3-pin connector.Piezo Sensor Kit, this sensor is required if missed throws are no longer displayed or detected. The most common cause of this is a broken ribbon cable. Replacing the sensor is very easy and takes just 3 minutes. Simply place it next to the old sensor using the self-adhesive backing, stick it in place, unplug the defective sensor, plug in the new one, and you’re done. The sensor’s special cable is highly flexible and therefore extremely durable.Installation instructions are included in the package.The sensor has been tested and works flawlessly; it has no issues with loud ambient noise or similar conditions.

Contact mat, rubber mat, protective mat for Löwen Dart FM90, SM92, SM94, HB8, HB9, etc.This is a genuine Löwen Dart replacement part of excellent quality.

Replacement power supply for defective power supplies (in a black plastic housing), see product image 3.Attention! If, on the other hand, you need a replacement for a power supply unit, as shown in product image 4, please select the version for power supply units with a PC ATX housing.Perfect replacement power supply with the correct connector for the HB8’s CPU board. The replacement takes just a few minutes and requires no special knowledge. Included in the set:- 230V power supply- Mounting bracket incl. screws (already attached)- 4-pin PE connectors- Installation instructions