msdart - Spareparts

Spare parts

Spare parts in best quality

Spare parts

Spare parts in best quality

With our spare parts you can ensure that your dart machine is always in perfect condition and you can enjoy a perfect game of darts every time. We always want to offer our customers the best possible experience, so we will be constantly expanding our range here too.

TIP

3x Triple blue segments, original Loewen dart spare part

3x Triple blue segments, original Loewen dart spare part in perfect quality.

Delivery time 2-5 days

Product number A23-4546-64

€5.39*

TIP

3x Triple red segments, original Loewen dart spare part

3x Triple red segments, original Loewen dart spare part in perfect quality.

Delivery time 2-5 days

Product number A23-4546-65

€7.48*

TIP

Adjustable foot for Loewen Dart SM92 SM94 HB8 HB9 etc. suitable

Adjustable foot set suitable for Loewen Dart SM92 SM94 HB8 HB9 etc..This set includes one adjustable feet suitable for the above dart machines and more, often used as a replacement for broken adjustable feet or torn out drive-in nuts.Very easy replacement of the defective feet. The required screws are included. Exactly suitable for dart machines of the older generation with screwed flange nuts (see photos), for newer models with drive-in nuts may have to be pre-drilled.Scope of delivery, 1x adjustable foot M10, 1x flange nut M10, screws for mounting.

Delivery time 2-5 days

Product number A23-4546-62

€8.69*

Details

TIP

Catch Segment, Original Loewen dart spare part, catch ring, catch ring, single segment

Single catch segment, original Loewen dart spare part.This is an original Loewen dart spare part in perfect quality.For an optimal playing experience, we recommend to replace all four catch segments.

Delivery time 2-5 days

Product number A23-4547-62

€6.99*

Details

Infrared IR sensor original Loewen dart SM92, SM94, HB8, HB9 etc., proximity sensor, new

The infrared (proximity) sensor is used to detect the player after throwing the third dart, when he is at the dartboard or removed again. Incl. installation instructions.It is an original Loewen dart spare part in perfect quality. Original Loewen part: E40450810 -1.

Delivery time 2-5 days

Product number A23-4546-63

€127.00*

Details

TIP

Misthrow sensor for Loewen Dart SM92, SM94, FM90, HB8, HB9, Novomatic, Kingsdart, Cyberdine, Interdart etc. with RCA, Cinch connector, Piezo Sensor

Misthrow sensor, also called Piezo Sensor Kit, suitable for the above dart machines.This sensor is needed when misthrows are no longer displayed and detected. The most common cause for this are broken sensor cables.The replacement of the sensor is very easy and done in 3min. Simply place it next to the old sensor using the self-adhesive surface and stick it on. Remove the plug (RCA, Cinch) of the defective sensor from the motherboard, plug in a new one and you're done. Some dart machines (e.g. FM90) have two of these sensors, upper and lower. These are available as a cheap set of 2 in our store. An installation manual is included despite the simple change.The sensor is tested and works flawlessly, no problem with loud ambient noise.

Delivery time 2-5 days

Product number A23-4546-56

€17.99*

Details

Misthrow sensor for Merkur Dart, 2-pin plug, piezo sensor, microphone

Misthrow sensor suitable for Merit Merkur Dart with 2-pin connector plug.Misthrow sensor, also called Piezo Sensor Kit, suitable for the above dart machine. This sensor is needed when misthrows are no longer displayed and detected. The most common cause for broken sensor cables.The replacement of the sensor is very easy and done in 3min. Simply place the sensor next to the old one using the self-adhesive surface, stick it on, pull off the plug of the defective sensor, plug on the new one and you're done.The special cable of the sensor is highly flexible and therefore extremely resilient. However, installation instructions are included despite the ease of replacement. The sensor is tested and works flawlessly, no problem with loud ambient noise.

Delivery time 2-5 days

Product number A23-4546-55

€15.99*

Details

Misthrow sensor for Merkur Dart, 3-pin plug, piezo sensor, microphone

Misthrow sensor suitable for Merit Merkur Dart with 3-pin connector plug.Misthrow sensor, also called Piezo Sensor Kit, suitable for the above dart machine. This sensor is needed when misthrows are no longer displayed and detected. The most common cause for broken sensor cables.The replacement of the sensor is very easy and done in 3min. Simply place the sensor next to the old one using the self-adhesive surface, stick it on, pull off the plug of the defective sensor, plug on the new one and you're done.The special cable of the sensor is highly flexible and therefore extremely resilient. However, installation instructions are included despite the ease of replacement. The sensor is tested and works flawlessly, no problem with loud ambient noise.

Delivery time 2-5 days

Product number A23-4546-54

€16.99*

Details

Misthrow Sensor Kit for Loewen Royal Dart 86 88, 3-pin plugs, Piezo Sensor, Microphone

Misthrow (Piezo) Sensor Kit, suitable for the above mentioned dart devices.This sensor is needed when misthrows are no longer displayed and detected. The most common cause for this are broken sensor cables.The replacement of the sensors is very easy and done in 3min. Simply place the self-adhesive surface next to the old sensors and stick it on.Important! The connector plugs are the variant with 3-pin plugs, which are installed in the generations of the 86 and 88 series. The variant with RCA plugs can also be found in our store.In this set you get both sensors in the corresponding cable lengths (dartboard 1x top, 1x bottom). Please make sure before buying that exactly these are also installed in your dart machine.The special cable of the sensors is highly flexible and therefore extremely resilient. An installation guide is included.The sensors are tested and work perfectly, no problem with loud ambient noise.

Delivery time 2-5 days

Product number A23-4547-59

€32.50*

Misthrow Sensor Kit for Loewen Royal Dart 86 88, RCA, Cinch plugs, Piezo Sensor, Microphone

Misthrow (Piezo) Sensor Kit, suitable for the above mentioned dart devices.This sensor is needed when misthrows are no longer displayed and detected. The most common cause for this are broken sensor cables.The replacement of the sensors is very easy and done in 3min. Simply place the self-adhesive surface next to the old sensors and stick it on.Important! The connector plugs are the variant with RCA, Cinch plugs, which are installed in the generations of the 86 and 88 series. The variant with 3-pin plugs can also be found in our store.In this set you get both sensors in the corresponding cable lengths (dartboard 1x top, 1x bottom). Please make sure before buying that exactly these are also installed in your dart machine.The special cable of the sensors is highly flexible and therefore extremely resilient. An installation guide is included.The sensors are tested and work perfectly, no problem with loud ambient noise.

Delivery time 2-5 days

Product number A23-4547-58

€32.50*

TIP

Misthrow sensor suitable for Löwen Turnier Dart SM92, SM94, HB8, HB9, Vision Dart 2000

Misthrow sensor, also called Piezo Sensor Kit, suitable for the above mentioned dart machines.This sensor is needed when misthrows are no longer displayed and detected. The most common cause for this are broken sensor cables.The exchange of the sensor is very easy and done in 3min. Simply place the sensor next to the old one using the self-adhesive surface, stick it on, pull off the plug of the defective sensor, plug on the new one and you're done. No threading through the housing or the like is necessary.The special cable of the sensor is highly flexible and therefore extremely resilient. An installation manual is included in the delivery despite the simple change.The sensor has been tested and works flawlessly, no problem with loud ambient noise. Please make sure before buying that this board (lower picture) is also installed in your dart machine. If this is not the case, you will find in our store also the variant with RCA plug for connection to the motherboard.

Delivery time 2-5 days

Product number A23-4547-55

€15.99*

Details

TIP

Original Loewen dart contact mat, original spare part, rubber mat, protective mat

Contact mat, rubber mat, protective mat for Loewen dart FM90, SM92, SM94, HB8, HB9, etc..It is an original Loewen dart spare part in perfect quality.

Delivery time 2-5 days

Product number A23-4547-61

€24.90*

Details

Power supply unit for Löwen Dart HB8, incl. mounting kit

Power supply unit for Löwen Dart HB8, incl. mounting kit.Replacement power supply unit for defective power supply units (i.e. the power supply unit in the black plastic housing, see article picture 3).Attention! If you need a replacement for a power supply unit, as shown in picture 4, please contact me in advance. I will be happy to make you a separate offer.Perfect replacement power supply unit with matching plug for the CPU board of the HB8. The replacement is done in a few minutes and requires no special knowledge.Included in the set,- 230V power supply unit- Mounting bracket incl. screws (already attached)- 4-way PE connections- Installation instructions

Delivery time 2-5 days

Product number A23-4546-66

€85.95*

TIP

T-Molding, original Loewen dart spare part, edge protector dartboard

T-Molding, edge protector for Loewen dart FM90, SM92, SM94, HB8, HB9 etc..This is an original Loewen dart spare part in perfect quality.

Delivery time 2-5 days

Product number A23-4547-60

€7.29*

TIP

Timekeeper RAM battery for Loewen Darts SM92, SM94, FM90, Royal Dartes 86/88

This module is needed if the value of the inserted coins is no longer recognized or after switching off the stored values are lost again.An instruction for the change as well as correct installation of the component is contained in the scope of supply.If you are unsure about the compatibility with your device, we will be happy to assist you.Attention, there are often timekeepers with unclear manufacturing data offered, often unfortunately cheap Far East productions. As a result, the batteries quit their service quite quickly.The devices distributed by us are purchased exclusively in Germany and have a service life of up to 10 years.

Delivery time 2-5 days

Product number A23-4546-57

€27.95*