Misthrow sensor for Loewen Dart SM92, SM94, FM90, HB8, HB9, Novomatic, Kingsdart, Cyberdine, Interdart etc. with RCA, Cinch connector, Piezo Sensor
| Quantity | Unit price |
|---|---|
| To 1 |
€17.99*
|
| To 2 |
€17.45*
|
| From 3 |
€17.09*
|
Available, delivery time: 2-5 days
Product number:
A23-4546-56
Product information "Misthrow sensor for Loewen Dart SM92, SM94, FM90, HB8, HB9, Novomatic, Kingsdart, Cyberdine, Interdart etc. with RCA, Cinch connector, Piezo Sensor"
Misthrow sensor, also called Piezo Sensor Kit, suitable for the above dart machines.
This sensor is needed when misthrows are no longer displayed and detected. The most common cause for this are broken sensor cables.
The replacement of the sensor is very easy and done in 3min. Simply place it next to the old sensor using the self-adhesive surface and stick it on. Remove the plug (RCA, Cinch) of the defective sensor from the motherboard, plug in a new one and you're done.
Some dart machines (e.g. FM90) have two of these sensors, upper and lower. These are available as a cheap set of 2 in our store. An installation manual is included despite the simple change.
The sensor is tested and works flawlessly, no problem with loud ambient noise.
This sensor is needed when misthrows are no longer displayed and detected. The most common cause for this are broken sensor cables.
The replacement of the sensor is very easy and done in 3min. Simply place it next to the old sensor using the self-adhesive surface and stick it on. Remove the plug (RCA, Cinch) of the defective sensor from the motherboard, plug in a new one and you're done.
Some dart machines (e.g. FM90) have two of these sensors, upper and lower. These are available as a cheap set of 2 in our store. An installation manual is included despite the simple change.
The sensor is tested and works flawlessly, no problem with loud ambient noise.
Login
WEEE-Reg.-Nr.
DE43541249