Misthrow Sensor Kit for Loewen Royal Dart 86 88, 3-pin plugs, Piezo Sensor, Microphone
Product number:
A23-4547-59
Product information "Misthrow Sensor Kit for Loewen Royal Dart 86 88, 3-pin plugs, Piezo Sensor, Microphone"
Misthrow (Piezo) Sensor Kit, suitable for the above mentioned dart devices.
This sensor is needed when misthrows are no longer displayed and detected. The most common cause for this are broken sensor cables.
The replacement of the sensors is very easy and done in 3min. Simply place the self-adhesive surface next to the old sensors and stick it on.
Important! The connector plugs are the variant with 3-pin plugs, which are installed in the generations of the 86 and 88 series. The variant with RCA plugs can also be found in our store.
In this set you get both sensors in the corresponding cable lengths (dartboard 1x top, 1x bottom). Please make sure before buying that exactly these are also installed in your dart machine.
The special cable of the sensors is highly flexible and therefore extremely resilient. An installation guide is included.
The sensors are tested and work perfectly, no problem with loud ambient noise.
This sensor is needed when misthrows are no longer displayed and detected. The most common cause for this are broken sensor cables.
The replacement of the sensors is very easy and done in 3min. Simply place the self-adhesive surface next to the old sensors and stick it on.
Important! The connector plugs are the variant with 3-pin plugs, which are installed in the generations of the 86 and 88 series. The variant with RCA plugs can also be found in our store.
In this set you get both sensors in the corresponding cable lengths (dartboard 1x top, 1x bottom). Please make sure before buying that exactly these are also installed in your dart machine.
The special cable of the sensors is highly flexible and therefore extremely resilient. An installation guide is included.
The sensors are tested and work perfectly, no problem with loud ambient noise.
Login
WEEE-Reg.-Nr.
DE43541249